k90 Pallet Stove

Parameters		Data & Specifications	Use
Material	Outer Body	1mm CRCA Mild Steel	It covers the combustion chamber of the stove from all sides.
	Inner Chamber	1mm MS CRCA (Refractory Provided Inside)	This is where the combustion of fuel (pellets) takes place. It has a primary and secondary supply of air. The refractory fitted inside carries out the function of containing the generated heat and reducing heat loss.
	Handle	25251.5 CRCA Square Pipe	For safe handling or moving the stove.
	Wood/Pellets Support	8*8 mm MS Square bar	It is a plate on which burning of fuel takes place.
	Base	1.5mm CRCA and 2mm HR	It provides support to the entire chamber.
	Leg Provided	2 & 3mm HR Angle & Wheel 2 Inch.	It provides balance and support to the stove.
	Stove Stand	0.6mm CRCA & 2 & 3mm HR	It provide the support to the stand.
Dimensions	Length of the Stove	955mm
	Width of the Stove	768mm
	Height of the Stove	705mm
	Outer Diameter of the Stove	462mm
	Diameter of the Combustion Chamber	350mm
	Electrical Components	Fan	Fan Axial 80x80mm 12vdc Wire Fan Tube axial 12VDC Square – 57.2 CFM(1.60m3/Min)	It blows the air into the chamber through blower pipe, which provides the primary and secondary air.
		Battery	12V, 7.5Amp	It provides the power supply to the Fan
PCB			For controlling the speed of Primary and secondary fan by controlling the power supply and also low charge Indication of battery through buzzer.
Charger		13.6V, 1.2Amp.	For charging the battery through PCB.
Weight	123.75 KG

Reviews

There are no reviews yet.

Be the first to review “k90 Pallet Stove”